+86-13233806514

Common Causes and Fixes for Ultrasonic Vibrating Screen Mesh Blocking

2026-11-20 08:54:500

Mesh blocking is a frequent complaint with an ultrasonic vibrating screen. When openings plug, throughput drops and the screened material loses consistency. Most blocking can be traced to a handful of avoidable causes.

Material moisture and stickiness

Damp or slightly oily powder tends to cling to the wire and build a layer over the mesh. If the feed has absorbed water during storage, dry it before screening or add a gentle dehumidifying step upstream. For naturally cohesive material, check that the ultrasonic vibrating screen is fed at a steady rate rather than in surges.

Incorrect mesh selection

A mesh that is too fine for the particle shape will blind quickly. Needle-like or flaky particles often bridge openings that would pass round granules of a similar nominal size. Check the mesh opening against the actual particle profile, not just the sieve number, and consider a slightly coarser deck if blinding starts soon after startup.

Ultrasonic system issues

The transducer and generator are there to keep the mesh from loading. If the amplitude is set too low, the anti-blinding effect weakens; if it is set too high, the mesh can fatigue. A loose connection or a worn transducer also reduces output. Listen for a change in the operating sound and have the generator settings checked on a routine basis.

Feeding and bed depth

A deep material bed adds weight that dampens screen motion. Spread the feed evenly across the surface and avoid overloading the inlet. Uneven feeding is a common reason one area of the mesh blocks while the rest stays clear.

Cleaning and maintenance habits

Residue left on the mesh between runs hardens and narrows the openings. Clean the deck promptly after each batch and inspect the mesh for damage during the changeover. Replacing a worn mesh is usually simpler than trying to restore a badly loaded one.

At Tianteng Machinery, we suggest keeping a short log of feed condition, mesh type and ultrasonic settings for each batch. Patterns emerge quickly, and the fix is usually a small adjustment rather than a new machine. Regular attention to these points keeps an ultrasonic vibrating screen working consistently.

#ultrasonic vibrating screen# #mesh blocking# #anti-blinding# #screen mesh# #Tianteng Machinery#

Send Inquiry